Along with all the above-mentioned features, this Metabo saw also features a working light for good vision in low light. With the help of this light, it helps you to work even in dark properly. V době koupě jsem ještě neměl vysavač, ale potřeboval jsem řezat a tak jsem doufal, že pytlík posbírá co možná nejvíc pylin - s tím rozhodně nepočítejte, po připojení vysavače se množství pylin sníží tak o 75% a prach téměř zmizí, bez vysavače pytlík sice něco pochytá, ale je to v celkovém bordelu relativně zanedbatelné. Pokud požadujete naprosto rovné řezy na zlomky milimetru, je nutné při nastavování úhlů dělat testovací řezy a ladit pomocí úhelníku. Já nejčastěji řežu kolmo (0°) a stačí nastavit těsně za nulu (cca o +0,3 - 0,5°) a řeže to dostatečně přesně. Na kratších prknech jsem si toho nevšiml, ale při řezání terasovek širokých 143mm jsem zjistil, že při aretaci na 0° mám prkna na jedné straně o milimetr a kus kratší, tedy příčný řez není rovný a po položení několika prken bylo vidět od oka, že netvoří navazující linii. Nemá délkový doraz, při řezání více menších kusů stejných rozměrů (řezal jsem asi 180 kusů dubových pásků 20x5mm a 15x5mm) je to na hlavu a je nutno si pomoct jinak

It’s rather annoying when manufacturers use so many different types and sizes of fixing on their tools. If they all used the same size hex bolt or crosshead screw, you wouldn’t need to fiddle around with different bits to get the saw to cut straight. To adjust the laser, you’ll need to undo a tiny grub screw with a hex key. Unfortunately, it’s a bit of an odd size at 2.5 mm, and I don’t have half sizes on my normal set. The next issue was when I tried to adjust the angle indicators. These are held in place with T20 size Torx head screws, which again aren’t included.

Fair

Test the operation of the saw blade manually by rotating it to different positions without touching other parts. The folding blade guard should provide unobstructed access to the saw blade without any obstacles. Weighing 14000 g, this saw is relatively portable and easy to maneuver. It comes with a saw blade and a dust bag, providing added convenience during use. Powered by an AC source, it is suitable for use in a variety of settings. Like the Bosch GCM8SJL, I would struggle to live with such a big saw in my small shed. The footprint is too big for me, so I’m forced to use it outside on my folding bench. If space isn’t an issue for you, then this is a perfectly good workshop saw that is also just about portable enough. The 8 inch blade gives a good all round cut size and comes with a 40 tooth blade that will give a nice finish. There are also other blades available for different finishes and cuts. Pojezd a aretace - dají se vytvářet i základní drážky třeba na menší šuplíky nebo řezat mnohem větší kusy dřeva, pokud je budete otáčet (maximálně jsem řezal trámy 18x10cm)

You get a pair of table extensions that fit neatly onto the end of the saw bed, and the right-hand one has a flip-up stop on it. This will come in extremely handy for ganging up work if you need to cut multiple bits of timber to the same length.

Why You Can Trust DIY Garden

Verify the rotation direction of the saw blade. When viewed from the left (open) side, the arrow on the saw blade should correspond to the direction indicated by the arrow on the blade guard. When the motor is running but the saw blade is not rotating, the problem can be caused by a few possible reasons. Here are the troubleshooting steps: We can easily cut different materials up to the depth of 65mm (2.5 inches). This depth is perfect for large construction work. It also cuts the fine pieces of large and hard timber material. A plus point is its cutting width is 12 inches.

Place it at an angle you want it to be cut. There will be angle measurement on the mitre saw. You can adjust the wood piece accordingly. The output power of 1500 watts increases the worth of this mitre saw. It provides you with a good power to cut different materials easily such as timber, plastic, and coated panels. Moreover, this high power also allows you to use the saw for the long term without any issue. The Metabo KGS 216 M is a powerful saw with an input power of 1500 W. It is equipped with a 216 mm blade diameter and a 30 mm blade bore. With an idle speed of up to 5000 RPM, this saw is designed to handle various cutting tasks efficiently. In addition to this, the Metabo mitre saw offers you a good cutting width of 305mm (12 inches). It cuts the hard and large wood planks with ease and gives you smooth sliding with better quality. Moreover, it comes with a precise turntable, so that you can have precise and accurate planks of materials. Last but not least, this cutter has a cutting depth of 65mm (2.5 inches). Following are the dimensions of this mitre saw 82 x 42 x 38 cm. The company also offers some additional accessories along with the cutter for better working. An effective dust bag is also present along with a mitre saw. Features Install a new blade, making sure that the arrow on the blade aligns with the arrow direction on the blade guard.Ensure that the saw blade is securely tightened and does not vibrate or become unbalanced during use. Tighten the tension screw firmly using the supplied hex key.

I immediately came across a bit of a problem. Supplied with the saw is a hex key with a Philips head screwdriver on one end. This works if you want to adjust the fence or change the blade but manipulating the laser guide and angle indicators was another matter entirely. All scales and operating elements are visible from the working position and can be operated intuitively Yes! We can cut 4×4 pieces with a mitre saw because the mitre saw has a wide motion range and you can easily tilt the head of the mitre saw. So, the cutting capacity of the device increases. Turning the saw table through 45° in either direction is lovely and smooth. I’m pleased that Metabo have included positive stops at all the common angles: 0 °, 15 °, 22.5°, 30° and 45° on both sides. The big red angle indicators make it easy to see exactly where you are as well.

Already know basics? Jump on the third step. We would recommend reading the manual to have some knowledge about the mitre saw. The cut depth is an ample 65mm (2.5 inches) which will cut a range of timber and some good size planks but will not cut through the larger construction size timbers. If this is for more finishing work and light construction it will be fine. There is also a depth stop feature allowing you to cut accurate groves. Adjustable and extendable table width extensions, removable to put long panels, slabs etc. underneath.